Portable spiral chute

Portable Spiral Chute 1. Introduction to a New Type of Spiral Chute Concentrator. The selection of portable spiral chutes includes an inclined flow sorting process. Mineral mortar is fed to a partially inclined chute or inclined surface. Under the driving force of water flow, the mineral particle group is loose and layered, and the lighter minerals in the upper layer quickly flow out of the groove. The heavier minerals in the lower part either stagnate inside the groove or are discharged from the lower part at a low speed. After obtaining the difference, concentrate and tailings are obtained. The fiberglass spiral chute is a machine for mining and beneficiation, especially ideal for sand mining on coasts, riverbanks, sandbanks, and river beds. The equipment has the characteristics of correct structure, simple installation, small land occupation, simple operation, stable beneficiation, clear screening of minerals, large processing capacity, high efficiency, high beneficiation concentration ratio, high recovery probability, and stable operation. There are also advantages such as lightweight, moisture prevention, rust prevention, corrosion resistance, and strong applicability to fluctuations in ore feed volume, concentration, particle size, and grade. 2、 Application techniques. The portable spiral chute sets up the glass fiber reinforced plastic spiral chute, calibrates the vertical line, uses an iron frame or wood to fix the proper position, sends the mineral sand to the two ore inlets above the spiral by the sand pump, adds make-up water, and adjusts the density of the mineral mortar. The mineral slurry naturally swirls from high to low. A continuous centrifugal force occurs in the flow speed of the swirling inclined surface to obtain the difference in gravity, Granularity and shape of the mineral sand, By achieving the effects of gravity and centrifugal force through swirling flow, the ore is separated, and the selected ore is discharged into the concentrate hopper and connected out through pipelines. The tailings are discharged into the tailings hopper and connected to the sand tank through pipelines, and then discharged by a mortar pump, completing the entire beneficiation process. Portable Spiral Chute III. Features or Highlights. 1. Due to its heavy duty and large processing capacity, contemporary mineral material processing generally requires the use of scale effects to create benefits. 2. Fine granulation: for the treatment of fine and small particle size minerals, especially the treatment of ore materials with a particle size of -0.047MM, the original machinery can basically ensure the recovery of+0.047MM Granularity. 3. With the development of Hydraulics, two-phase flow, equipment vibration, etc., GRP spiral chute has developed from simple use of gravity and water blocking force to composite centrifugal force, mechanical vibration force, magnetic separation force, etc. Through a composite force field, the enrichment of useful minerals and the separation of fine and fine particles are enhanced, thereby increasing the ore recovery rate. 4. Based on energy conservation, consumption reduction and environmental protection, it should occupy a small area and space, and consume less water and electricity. 5. Simple and flexible operation, stable sorting process, simple structure, convenient for Computerized maintenance management system. Portable spiral chute . 4、 The structure of the fiberglass chute consists of a feeding equalizer, a cross (tripod), a feeding chute, a rotating chute, a receiving chute, a gathering bucket, and a trough support. 5、 Application. This machine is used to separate 0.3-0.02mm fine materials to obtain iron, ferrotitanium, ferrochrome, ferrosulfide, zircon ore, Rutile ore, monazite ore, phosphorus, tungsten sand, tin ore, tantalum niobium, niobium ore and other non-ferrous metal ores, rare mineral metals and non-metallic minerals with gravity difference. Portable Spiral Chute Portable Spiral Chute