Manufacturing Method of Welded Pipe Spiral Chute

Manufacturing Method of Welded Pipe Spiral Chute

Method 1 and Description of Manufacturing Welded Pipe Spiral Chutes. Spiral chute is a combination of the characteristics of glass fiber reinforced plastic spiral chute, gravity separation spiral chute, shaking table and centrifugal concentrator. After the relevant scientific research organized by the Ministry of Metallurgy, the design, university and the mine have passed the appraisal. It believes that such equipment has superior performance and further separation goals. At the same time, it has won the scientific and technological research achievement award of the Ministry of Metallurgical Industry. Now it has been widely used in non-ferrous and Ferrous mines. This machine is suitable for sorting iron ore, Ilmenite, Chromite, pyrite, zircon sand, Rutile ore, monazite ore, phosphorus ethyl, tungsten, tin ore, tantalum, niobium ore and other non-ferrous metal, rare metal and nonferrous metal ore bodies with specific gravity difference of 0.3-0.02 mm fine materials., Method 2 for making welded pipe spiral chutes: The working principle is the same: mineral mortar is slowly fed onto the rotating groove surface through the feeding groove installed at the end of the spiral groove head, and selection is carried out. The tail end of the spiral groove is equipped with a valve type product selection groove, which divides the sorting equipment into three types according to grade along the radial direction. By adjusting the orientation of the valve block to change the cutting width of each product, the equipment gathering bucket allows the obtained variable mineral flow to be collected and exported. The cross section and slope of the curve of the spiral concentrator are very suitable for the separation of fine particle materials. Method 3 for Manufacturing Spiral Chutes for Welded Pipe @ @ 000: Characteristics 1. Stable and Easy to Control Selection Steps 2. Allowing Different Range of Feed Density 3. Very High Enrichment Ratio, High Recovery Rate, 4. Small Floor Area and Water Consumption 5. Simple Structure, No Power, Welding Pipe Spiral Chute Manufacturing Method 6. Large Processing Capacity 7. Easy to Understand and Operate Installation 8. Quick and Effective Manufacturing Method for Spiral Chutes for Welded Pipe 4 Structural composition and manufacturing method of welded pipe spiral chutes. Spiral chutes are composed of a feeding device, a cross (tripod), a feeding groove, a spiral groove, an acquisition groove, a gathering bucket, and a groove support. 5、 Purpose. Manufacturing method of spiral chute for welded pipe This product is suitable for separating iron, ferrotitanium, chromite, pyrite, zircon, Rutile, monazite, phosphorus, tungsten, tin placer, tantalum niobium ore, niobium from fine materials with a particle size of 0.3-0.02mm, and has a specific gravity difference from other non-ferrous metal ores, rare ore metals or non-metallic minerals. Manufacturing Method for Welded Pipe Spiral Chute Manufacturing Method for Welded Pipe Spiral Chute

Manufacturing Method of Welded Pipe Spiral Chute