Assembling spiral chutes

Assemble spiral chutes. Assembled spiral chute 1. Description: Due to its low environmental pollution and low cost, gravity separation is widely used in the beneficiation of metal mines and non-ferrous metal mines. The fiberglass spiral chute is a type of gravity beneficiation machinery, with a cubic parabolic shape in the cross-section. It is suitable for handling finer particle levels of -0.2 millimeters. During the beneficiation process, there is no need to add water for flushing, and the tail of the chute is divided into sections to obtain fine, medium, and tailings. 2、 Technical principle: Spiral chute polyurethane spraying. The fiberglass spiral chute separator is freely placed on the cross (or tripod) on the support table. Equal slurry is slowly fed onto the surface of the rotating groove through the feeding chute installed at the head of the spiral groove, and sorting is carried out. The tail is equipped with a valve type product selection slot, which divides the selected equipment into three (or four) categories according to grade along the radial direction. Change the cutting width of each product by adjusting the orientation of the valve block. The equipment gathering bucket is a concentric circular tube that allows the obtained multi-directional mineral flow to be densely drawn out. The cross-section of the spiral chute and the slope change of the curve are particularly suitable for the separation of fine particle materials. Assembled Spiral Chute III. Features and Highlights 1. Heavy-duty, large processing output, and the principle of contemporary mineral processing requires the creation of benefits through economies of scale. 2. Fine granulation is used for the treatment of fine particle minerals, especially for the treatment of mineral materials with a particle size of -0.047mm. Originally, the machine could basically ensure the recovery of particles with a particle size of+0.047mm. 3. With the development of Hydraulics, two-phase flow, mechanical vibration, etc., GRP chutes have developed from the simple use of gravity and water blocking force to the composite application of centrifugal force, equipment vibration force, magnetic separation force, etc. By using a composite force field, the enrichment of applicable minerals is enhanced and the separation of fine and micro particles is achieved, thereby increasing the recovery rate of mineral materials. 4. Based on energy saving, environmental protection and consumption reduction, the land area, space, water and electricity consumption should be small. 5. Simple and flexible operation, stable selection steps, simple structure, and convenient maintenance management. Assembling spiral chute IV. According to the particle size of processed ore materials, the chute can be divided into three types: (1) coarse chute. The maximum Granularity of ore feeding is more than 2-3 mm, and the maximum can reach 100-200 mm. (2) Sand ore chute, processing 2-3mm Granularity ores. (3) Slurry spiral chute, feeding particle size ＜ 0.074 mm. 5、 Scope of Use: Spiral Chute User Manual. Spiral chutes are suitable for handling 0.6-0.03MM and this vein and sand ore, but high mud content is unfavorable for sorting. Nowadays, it has been widely used for processing iron ore, tungsten, tin ore, tantalum and niobium, beach and riverside mineral sand and sand gold. Assembly of spiral chutes Assembly of spiral chutes