How to lower the material in the spiral chute

How to lower the material in the spiral chute

How to use spiral chutes for material removal: 1. Introduction: Gravity beneficiation is widely used in metal and non-metallic ore beneficiation due to its low environmental pollution and low cost. The fiberglass spiral chute is a type of gravity separation machine, characterized by a cubic parabolic shape on the cross-section. It is suitable for processing finer particles up to -0.2mm in size. In the sorting process, there is no need to add water for flushing, and the end of the chute is divided into sections to obtain fine, medium, and tailings. 2、 Working principle: The fiberglass chute separator is freely placed on the cross (or tripod) of the support table. Equal mortar is slowly fed onto the surface of the rotating groove through the feeding chute installed at the end of the spiral groove head, and sorting is carried out. The tail end is equipped with a valve block type product acquisition tank, which divides the selected equipment into three types (or four types) according to grade along the radial direction. Change the cutting width of each product by adjusting the orientation of the valve block. The equipment gathering bucket is a concentric circular tube that allows the selected variable ore flows to converge and export separately. The transverse plane of the fiberglass spiral chute has different slopes, which is very suitable for the separation of fine ore particles. How to lower materials for spiral chute 3. Characteristics 1. The sorting process is stable and easy to control 2. The feed density is allowed to vary widely 3. The ultra-high enrichment ratio and high recovery rate 4. The area occupied is very small and the water consumption is small 5. The structure is simple and does not require power 6. The processing capacity is large 7. The installation is simple and easy to operate 8. The investment is small and the results are quick. How to lower materials for spiral chute 4. The structure consists of a feed homogenizer The feeding trough, rotating trough, equipment selection trough, product gathering hopper or trough bracket (including cross or triangular frame) are composed of six parts. The spiral groove formed by connecting spiral pieces is a key accessory. The rotating plate is made of fiberglass (fiberglass reinforced coal gangue), connected together by screws, and the rotating groove has a pre designed durable wear-resistant layer on the selected surface. It also has the advantages of light weight, durability, and durability in using consumer goods. Above the spiral groove is a multi tube feeding homogenizer that screens ore evenly, making it easy and convenient to operate. The sorting machine is not limited to being placed on the cross (or tripod) of the support table. The uniform mortar is slowly fed onto the spiral groove surface by installing the feeding groove at the head end of the rotating groove for sorting. The tail of the rotating groove is equipped with a valve type new equipment to cut the groove and classify the selected new products into three categories (or four categories) radially according to grade. Change the width of each new device by adjusting the position of the valve block. The new product gathering bucket is a concentric circular tube that allows the selected multi head ore flows to converge and lead out separately. The cross section and slope of the curve of the spiral concentrator are particularly suitable for the selection of fine-grained ore. 5、 This machine can be used to separate iron ore, Ilmenite, Chromite, pyrite, zircon sand, Rutile, monazite, phosphorus ethylene, tungsten, tin ore, tantalum ore, tantalum niobium and other non-ferrous metal ores, rare metals and non-metallic ore bodies with different density and proportion. How to lower the material for spiral chutes How to lower the material for spiral chutes

How to lower the material in the spiral chute