Internal process of spiral chute

Internal process of spiral chute

Internal Process of Spiral Chute 1. Overview: The spiral concentrator combines the characteristics of gravity spiral chutes, gravity spiral chutes, shakers, and centrifugal gravity concentrators. After scientific research organized by the Ministry of Metallurgy, appraisal conducted by departments such as design, universities, and beneficiation companies, it is believed that this type of machine has excellent performance and advanced sorting indicators. At the same time, it has won the Science and Technology Research Achievement Award from the Ministry of Metallurgical Industry and has been awarded in the field of non-ferrous metals Black mining metals are widely used. This product can be used to separate iron ore, Ilmenite, Chromite, pyrite, zircon, Rutile, monazite, phosgenite, tungsten ore sand, sand tin, tantalum niobium ore, tantalum niobium ore or other non-ferrous metal ores, rare metals and non-metallic mineral bodies with different density and specific gravity. 2、 The production principle is also that the slurry is slowly fed to the surface of the spiral groove through the feeding groove installed at the beginning of the rotating groove, and sorting is carried out. The tail end of the rotating groove is equipped with a valve block type product cutting groove, which divides the selected equipment into three types according to grade along the radial direction. By adjusting the orientation of the valve block to change the acquisition width of each product, the equipment gathering hopper enables the selected multi head ore flow to be densely exported separately. The transverse plane of the fiberglass spiral chute has different slopes, which is extremely suitable for the separation of fine mineral particles. Internal process 3, advantages and characteristics of the spiral chute: 1. High efficiency, high recovery rate, and correct ore sorting; 2. No power required; 3. Lightweight, rust resistant, durable, wear resistant, and corrosion-resistant; 4. Low operating costs and long service life; 5. Strong adaptability to fluctuations in ore feed volume, concentration, particle size, and grade; The friction force caused by the surface of 6 diamond sand makes the beneficiation effect better than other plastic surfaces. The internal process of spiral chute IV. According to the Granularity of the processed mineral materials, the chute can be divided into three types: (1) Coarse grained chute. The maximum Granularity of the feed is more than 2-3mm, and the maximum can reach 100-200MM. (2) Sand ore chute, processing 2-3mm Granularity ores. (3) The spiral chute of the ore slurry has a feeding particle size of less than 0.074 millimeters. 5、 Applicable field: FRP chutes are suitable for separating fine iron ore, ferrotitanium ore, chromite ore, pyrite ore, tin ore, tantalum niobium ore, placer gold ore, coal, monazite ore, Rutile ore, zircon ore, rare earth and other metal and non nonferrous metal minerals with complete density ratio difference. Internal process of spiral chute Internal process of spiral chute

Internal process of spiral chute