Experimental Report on Spiral Chute

Experimental Report on Spiral Chute

Experimental Report 1 on Spiral Chute: Clarify that the chute sorting process includes an inclined flow sorting process. When the mortar is fed to a partially inclined chute or slope, with the assistance of water flow, the mineral particle group becomes loose and layered. The upper layer of light mineral materials is quickly discharged from the outside of the groove, while the lower layer of minerals with high specific gravity are retained inside the groove or slowly discharged from the lower part. After being distinguished and connected, concentrate and tailings can be obtained. Fiberglass spiral chutes are equipment for mining and beneficiation, making them particularly ideal for mineral mining along coasts, rivers, beaches, and streams. The equipment has the characteristics of appropriate structure, simple installation, small footprint, simple operation, stable beneficiation, clear screening of minerals, high yield, high efficiency, high beneficiation concentration ratio, high recovery probability, and stable operation. There are also advantages such as small weight, moisture resistance, rust resistance, corrosion resistance, and strong adaptability to fluctuations in ore feed volume, concentration, particle size, and grade. 2、 The working principle of the spiral mineral separator is that the mineral separator is freely placed on the cross (or tripod) of the support table. The same slurry is slowly fed onto the spiral groove surface of the feeding groove installed on the rotating groove head for sorting. The tail end is equipped with a valve block type product cutting groove, allowing the sorting equipment to be divided into three (or four) types according to grade along the radial direction. Change the acquisition width of each product by adjusting the orientation of the valve block. The equipment gathering bucket is a concentric circular tube that distinguishes and aggregates the selected multi-directional mineral flow. The transverse surface of the fiberglass chute has a slope change that is extremely suitable for the selection of fine-grained materials. Spiral Chute Experiment Report 3. Featured FRP chutes are particularly concerned among various gravity beneficiation equipment due to their low energy consumption, simple structure, small area occupied, simple operation, stable beneficiation, clear mineral separation, no moving parts, convenient Computerized maintenance management system, and large output per unit size. The equipment has a wide and relatively stable groove surface, and the area where the slurry flows in a laminar flow is quite large, making it more suitable for processing medium to fine (-4mm) ore particles. Fiberglass spiral chutes with diameters of 400, 600, 900, and 1200mm have been produced in China, Ф The processing capacity of 1200MM four head is about 4-6 t/h. Experimental Report on Spiral Chutes 4. Structural Composition: Spiral chutes are composed of a feeding homogenizer, a cross (tripod), a feeding chute, a spiral groove, a cutting groove, a gathering bucket, and a groove pillar. 5、 Scope of application Spiral concentrator is suitable for separating fine grained iron ore, Ilmenite, Chromite, pyrite, placer tin, tantalum niobium ore, placer gold, coal, monazite ore, Rutile ore, zircon sand, rare earth ore or other metal and non-metallic ore with sufficient gravity difference. Spiral Chute Experimental Report Spiral Chute Experimental Report

Experimental Report on Spiral Chute