Selling points of spiral chutes

Selling points of spiral chutes

Selling Point 1 of Spiral Chute: Product Description: A gravity separation machine that uses the inertial centrifugal force generated by slurry in spiral rotary motion to achieve the separation of light and heavy minerals. 2、 The working principle is that the ore slurry is slowly fed onto the rotating groove surface through the feeding chute installed at the beginning of the spiral groove, and sorting is carried out. The tail end of the spiral groove is equipped with a valve block type product acquisition groove, and the selected equipment is divided into three types according to grade along the radial direction. By adjusting the orientation of the valve block to change the cutting width of each product, the equipment gathering hopper enables the selected multi-directional mineral flow to be densely led out. The transverse surface of the fiberglass chute has different slopes, which is very suitable for the separation of fine mineral particles. spiral chute selling point 3. Features This machine is suitable for separating fine materials with Granularity of 0.3-0.02mm to obtain iron, ferrotitanium, ferrochrome, ferrosulfide, zircon, Rutile, monazite, phosphorus, wolframite, cassiterite, tantalum niobium, tantalum niobium ore or other non-ferrous metal ores, rare mineral metals and non-ferrous metal minerals with gravity differences. This equipment also has advantages such as stable sorting process, easy control, wide range of allowable changes in ore concentration, high enrichment ratio, high recovery probability, small area occupation, low water consumption, simple structure, no need for power, large production capacity, simple installation, convenient operation, low investment, and fast efficiency. The selling point of the spiral chute is IV. The structure of the fiberglass spiral chute is composed of six parts: a feeding homogenizer, a feeding chute, a rotating chute, a product selection chute, an equipment gathering hopper, and a groove bracket (including a cross or triangular frame). The spiral groove formed by the connection of spiral plates is a key component. The rotating plate is made of fiberglass (fiberglass reinforced coal gangue) and connected together by bolts. The rotating groove has a pre designed durable and wear-resistant layer on the selected surface. She has the advantages of lightweight, solid, and durable use of consumer goods. The spiral groove is equipped with a multi tube feeding homogenizer above it to screen the ore, which is also easy to operate. The concentrator is not limited to being placed on a cross (or tripod) on a support table. The evenly distributed mineral mortar is slowly fed onto the surface of the spiral groove through the feeding chute installed at the head of the rotating groove, and sorting is carried out. The bottom of the rotating groove is installed in a valve block type new equipment cutting groove, allowing other new products to be selected and classified into three (or four) categories according to grade along the radial direction. Change the acquisition width of each new product by adjusting the position of the valve block. The new equipment gathering bucket is a concentric circular tube that converges and leads out the intercepted multi-directional mineral flow. The transverse section of the spiral chute has a slope change, which is particularly suitable for the sorting of fine-grained materials. 5、 Application field Spiral chute is suitable for separating fine grained iron ore, ferrotitanium ore, chromite ore, pyrite ore, placer tin, tantalum niobium ore, gold ore, coal, monazite, Rutile, zircon, rare earth and other metal and non nonferrous metal minerals with complete density and proportion difference. Spiral Chute Selling Points Spiral Chute Selling Points

Selling points of spiral chutes