Requirements for ore particle size of spiral chutes

Requirements for ore particle size of spiral chutes

Spiral chute requires ore particle size. 1. Equipment overview. A gravity beneficiation machine that utilizes the continuous centrifugal force generated by the slurry in the spiral rotary motion to achieve the separation of light and heavy minerals. 2、 Production principle: The screening device of the spiral concentrator is not limited to being placed on the cross (or tripod) of the support table. The average ore slurry is slowly fed to the surface of the rotating groove through the feeding groove installed at the end of the spiral groove head for sorting. The tail end is equipped with a valve block type equipment cutting groove, allowing the sorted products to be divided into three (or four) categories radially according to grade. Change the selection width of each device by adjusting the position of the valve block. The product gathering bucket is a concentric circular tube that gathers and exports the obtained variable mineral flows. The transverse plane of the spiral chute and the slope of the curve vary greatly, making it suitable for the separation of small particle mineral materials. The requirements for ore particle size of the spiral chute are three advantages: 1. Stable, easy to operate, and a large density range. 2. The material processing has a large production capacity, high concentration, and high recovery rate. 3. Small space occupation, low water consumption, simple structure, and no need for power. 4. Easy installation, easy operation, low investment, and fast efficiency. The requirement for ore particle size in spiral chutes is . The structure of the spiral chute is composed of six parts: a feeding homogenizer, a feeding chute, a rotating chute, a product intercepting chute, an equipment gathering hopper, and a groove support (including a cross or triangular frame). The spiral groove connected by the rotating plate is a key accessory. The spiral plate is made of fiberglass (fiberglass reinforced coal gangue) and connected together through screws. The sorting surface of the rotating groove has one layer of pre designed durable wear-resistant layer. It has the advantages of lightweight, sturdy, and durable consumer goods. The spiral groove is equipped with a multi tube feeding homogenizer to screen minerals evenly, which is not cumbersome to operate. The mineral sorting equipment is freely stacked on the cross (or tripod) of the support table. The evenly distributed mortar is slowly fed to the spiral groove surface through the feeding groove installed at the head of the rotating groove, and the selection is carried out. The bottom of the rotating groove is installed in a valve block type new equipment to obtain the groove, allowing the sorted new products to be divided into three (or four) new products according to grade along the radial direction. Change the selection width of each new device by adjusting the position of the valve block. The new product gathering bucket is a concentric circular tube that distinguishes and converges the intercepted multi head ore flow. The cross-section of the fiberglass chute and the change in slope of the curve are particularly applicable for the selection of fine-grained materials. 5、 Application This product is applicable to sorting iron, ferrotitanium, ferrochrome, ferrosulfide, zircon, Rutile, monazite, phosphate rock, wolframite, cassiterite, tantalum ore, niobium ore and other non-ferrous metal ores, rare mineral metals and non-metallic minerals with specific gravity difference. Requirements for ore particle size of spiral chutes: Requirements for ore particle size of spiral chutes

Requirements for ore particle size of spiral chutes