Smooth plastic spiral chute

Plastic spiral chute is smooth. 1. Equipment Introduction: A gravity beneficiation machine used for separating light and heavy minerals through continuous centrifugal force during the rotary spiral movement of mortar. 2、 Using techniques to establish a fiberglass spiral chute, align it with the vertical line, use an iron frame or wood to fix it in the appropriate direction, and use a sand pump to deliver the mineral sand to the top two feeding ports of the spiral. It is mixed with replenishing water to adjust the concentration of the mineral slurry. The mineral sand slurry naturally swirls from high to low, generating a single inertial centrifugal force in the rotating inclined flow rate, which varies in the specific gravity, particle size, and shape of the mineral sand, Through the influence of the gravity and centrifugal force of the swirling flow, the ore is separated, and the selected ore is discharged into the concentrate hopper and connected out through pipelines. The tailings enter the tailings hopper and are connected to the sand tank through pipelines, and then discharged by a mortar pump, completing the entire beneficiation process. plastic spiral chute is smooth. 3. Features and highlights: 1. Large scale and large production capacity. Today, the overall requirement for processing mineral materials is to establish profits through large-scale processing. 2. Fine granulation is used for the treatment of fine particle grade mineral materials, especially for minerals with a particle size of -0.047mm. The original machinery can basically ensure the recovery of+0.047mm particle size. 3. With the development of Hydraulics, two-phase flow, equipment vibration, etc., the spiral concentrator has progressed from simple use of gravity and water flow resistance to the level of combined use of centrifugal force, machine vibration force, magnetic force, etc. By using a composite force field, the enrichment of useful mineral materials and the separation of fine and micro particles are increased, thereby increasing the mineral recovery rate. 4. Based on energy saving, environmental protection and consumption reduction, it needs small floor area, space, water and electricity consumption. 5. Easy and flexible operation, stable selection process, simple structure, and convenient maintenance and management. The plastic spiral chute is smooth and consists of six parts: a feeding homogenizer, a feeding chute, a rotating groove, a product acquisition groove, an equipment gathering hopper, and a groove bracket (including a cross or triangular frame). The spiral groove formed by connecting the spiral pieces is a key component. The rotating plate is made of fiberglass (fiberglass reinforced coal gangue) and connected together by screws. The selection surface of the rotating groove has a pre made wear-resistant layer. She has the advantages of lightweight, sturdy, and durable consumer goods that are not easily damaged. The head of the spiral groove is equipped with a multi tube feeding homogenizer to sort minerals evenly, which is not cumbersome to operate. The mineral sorting device is freely placed on the cross (or tripod) of the support table. The evenly divided mortar is slowly fed onto the surface of the spiral groove through the feeding chute at the head end of the rotating groove for sorting. The tail of the rotating groove is installed in a valve block type new product selection groove, allowing the selection of new equipment to be divided into three (or four) types of new products radially according to grade. Change the cutting width of each new device by adjusting the position of the valve block. The new product gathering bucket is a concentric circular tube that distinguishes and converges the obtained multi head ore flows. The horizontal plane of the spiral concentrator is particularly suitable for the separation of small particle ore materials when the slope of the curve changes. 5、 The use of a range spiral concentrator is suitable for processing 0.6-0.03mm or vein ore and minerals, but it is unfavorable for separation when the mud content is high. Nowadays, it is widely used for processing iron ore, tungsten, tin, tantalum niobium ore, bay or riverbank ore sand, and gold ore. Smooth plastic spiral chute Smooth plastic spiral chute