Introduction to Spiral Chute Technology

Introduction to Spiral Chute Technology

Introduction to Spiral Chute Technology: 1. Describe that the beneficiation chute includes a slope flow separation process. The slurry is fed to a inclined chute or inclined plane, and under the push of water, the mineral particle group becomes loose and layered. The upper layer of light mineral material is quickly discharged from the groove, while the lower layer of heavy mineral stays in the groove or flows out at low speed from the bottom. After obtaining the concentrate and tailings, respectively. Glass fiber reinforced plastic chutes are mining and beneficiation equipment, especially ideal for mineral mining and beneficiation on beaches, riverbanks, sandbanks, and river beds. The equipment has the characteristics of appropriate structure, simple installation, small footprint, simple operation, stable beneficiation, clear separation of ore, strong processing ability, high efficiency, high enrichment ratio, high recovery probability, and stable operation. And it has advantages such as light weight, moisture prevention, rust prevention, strong corrosion resistance, and strong applicability to fluctuations in ore feed volume, concentration, particle size, and grade. 2、 The application technique is to make the fiberglass spiral chute stand up, align it with the vertical line, use an iron frame or wood to stabilize it in the appropriate position, use a mortar pump to deliver the sand ore to the two feeding ports on the spiral head, enter the supplementary water, adjust the concentration of the ore slurry, and the ore slurry will naturally swirl from top to bottom. In the rotating inclined plane flow rate, an inertial centrifugal force will appear, resulting in differences in gravity, particle size, and morphology of the ore sand, By obtaining gravity and centrifugal force through swirling flow, the efficiency is achieved, allowing the separation of ore and sand. The selected ore is discharged into the concentrate hopper and connected out through pipelines. The tailings flow into the tailings hopper and are moved to the sand tank through pipelines, and then discharged by a sand pump, completing the entire beneficiation process. Introduction to Spiral Chute Technology III. Advantages and Features: 1. Stable, easy to operate, and with a large density range. 2. High material processing yield, high enrichment ratio, and high recycling rate. 3. Small footprint, low water consumption, simple structure, and no need for power. 4. Simple installation, simple operation, low investment, and fast returns. Introduction to Spiral Chute Technology 4. Structural Composition: Spiral concentrators all consist of a feeding device, a cross (tripod), a feeding chute, a spiral groove, a cutting groove, a gathering bucket, and a groove pillar. 5、 Application This product is applicable to sorting iron, ferrotitanium, ferrochrome, ferrosulfide, zircon, Rutile, monazite, phosphate rock, wolframite, cassiterite, tantalum ore, niobium ore and other non-ferrous metal ores, rare mineral metals and non-metallic minerals with specific gravity difference. Introduction to Spiral Chute Technology

Introduction to Spiral Chute Technology