Spiral chute coal washing slurry process

Spiral chute coal washing slurry process

Spiral Chute Coal Slurry Washing Process 1. Product Overview: A gravity beneficiation machine that utilizes the continuous centrifugal force generated by the slurry in the spiral rotary motion to separate lightweight and heavy minerals. 2、 Working principle: The fiberglass chute sorting machine is not limited to being placed on the cross (or tripod) of the support table. The uniform mortar is slowly fed onto the spiral groove surface through the feeding chute installed at the head end of the rotating groove for sorting. The tail end is equipped with a valve block type product cutting groove, which divides the selected equipment into three categories (or four categories) radially according to grade. Change the acquisition width of each product by adjusting the position of the valve block. The equipment gathering bucket is a concentric circular tube that allows the selected multi head ore flow to converge and export differently. The cross section and slope of the curve of the spiral concentrator are particularly suitable for the separation of fine particle ore materials. spiral chute coal washing mud process III. Advantages and features: 1. Extremely high efficiency, high recycling rate, and correct screening of ore; 2. No power required; 3. Small weight, rust proof, durable, wear resistant, and not easily corroded; 4. Low operating costs and long application life; Strong applicability to fluctuations in ore feed volume, concentration, particle size, and grade; The frictional force formed on the surface of 6 diamond sand makes the beneficiation effect better than other plastic surfaces. The spiral chute coal washing mud process IV. According to the Granularity of the processed ore, the chute can be divided into three types: (1) coarse size chute, the maximum particle size of ore feeding is more than 2-3MM, and the maximum can reach 100-200mm. (2) The ore chute is used to handle 2-3mm sized ore materials. (3) Slurry chute, feeding Granularity is less than 0.074MM. 5、 This machine is suitable for separating iron ore, ferrotitanium ore, chromite ore, pyrite ore, zircon sand, Rutile ore, monazite ore, phosphorus, tungsten ore, placer tin ore, tantalum niobium, niobium ore and other nonferrous metals, rare mineral metals and non nonferrous metal mineral bodies with gravity difference from small materials with Granularity of 0.3-0.02MM. Spiral chute coal washing mud process Spiral chute coal washing mud process

Spiral chute coal washing slurry process