The spiral chute is located at the tailings discharge port of the concentrate

The spiral chute is located at the tailings discharge port of the concentrate

The spiral chute is the ore discharge port for concentrate tailings. Introduction: Gravity beneficiation spiral chute combines the characteristics of fiberglass spiral chute, gravity beneficiation spiral chute, shaking table, and beneficiation centrifuge. After organizing relevant scientific research by the Ministry of Metallurgical Industry, design, school, and beneficiation enterprise operation appraisal, it is believed that this type of machine has excellent performance and progress in beneficiation indicators. At the same time, it has won the Science and Technology Research Achievement Award from the Ministry of Metallurgical Industry, Now it has been widely used in nonferrous and Ferrous. This product is suitable for separating iron ore, ferrotitanium ore, chromite ore, pyrite, zircon sand, Rutile ore, monazite ore, phosphorus, tungsten ore, sand tin, tantalum niobium, tantalum niobium or other non-ferrous metal ores, rare mineral metals and non-metallic minerals with gravity difference from 0.3-0.02 mm small materials. 2、 Technical principle: The fiberglass spiral chute mineral separator is not limited to stacking on the cross (or tripod) of the support table. The average mineral mortar is slowly fed onto the spiral groove surface through a feeding groove installed at the end of the rotating groove head for sorting. The tail is equipped with a valve type product selection slot, which divides the selection equipment into three types (or four types) according to grade along the radial direction. Change the cutting width of each product by adjusting the orientation of the valve block. The equipment gathering bucket is a concentric circular tube that allows the obtained multi head ore flow to gather and lead out. The cross section of the spiral chute is particularly suitable for the selection of fine ore particles due to changes in the slope of the curve. The 3 spiral chute is the ore discharge port for concentrate tailings. The characteristic spiral concentrator has attracted more attention among many gravity separation machines due to its low power consumption, simple structure, small land occupation, simple operation, stable beneficiation, clear mineral sorting, no moving parts, convenient maintenance and management, strong processing capacity per unit area, and other characteristics. Machinery with relatively wide or flat groove surfaces and large areas of laminar flow of mortar are more suitable for processing medium to fine (-4MM) sized ores. China has made spiral chutes with diameters of 400, 600, 900, and 1200 millimeters, Ф The production capacity of 1200mm four heads is approximately 4-6 tons per hour. The spiral chute is located at the concentrate tailings discharge port . 4. The chute can be divided into three categories according to the Granularity of the processed mineral materials: (1) coarse particle spiral chute, the maximum particle size of ore feeding is more than 2-3mm, and the maximum particle size can be 100-200mm. (2) The sand ore chute is used to handle 2-3MM sized ores. (3) Slurry chute, feeding Granularity is less than 0.074mm. 5、 The fiberglass spiral chute is suitable for processing 0.6-0.03mm and vein and placer ores, but it is unfavorable for sorting when the mud content is high. It is now widely used for processing iron ore, tungsten, tin, niobium tantalum ore, coastal and river sand, and placer gold, among others. The spiral chute is the concentrate tailings discharge port, The spiral chute is the concentrate tailings discharge port

The spiral chute is located at the tailings discharge port of the concentrate