Spiral chute for plastic material

Spiral chute for plastic material

Material spiral chute 1. Description: Due to its low pollution and low cost, gravity separation is widely used in the beneficiation of metal and non-ferrous metals. The fiberglass spiral chute is one of the gravity beneficiation machinery, with a structural feature of a cubic parabolic cross-section. It is used to handle finer particle sizes of -0.2mm, and does not require flushing water in the sorting process. The tail part of the chute is selected in sections to select fine, medium, and tailings. 2、 The working principle is the same: mineral mortar is slowly fed onto the rotating groove surface through the feeding chute installed at the end of the spiral groove head, and sorting is carried out. The bottom of the spiral groove is equipped with a valve block type product cutting groove, and the selected equipment is divided into three types according to grade along the radial direction. By adjusting the position of the valve block to change the acquisition width of each product, the equipment gathering hopper allows the selected multi head ore flow to be aggregated and exported. The cross section of the spiral concentrator and the change in slope of the curve are very suitable for the selection of fine-grained ore materials. plastic spiral chute 3. Features This equipment is suitable for sorting iron, ferrotitanium, ferrochrome, ferrosulfide, zircon, Rutile, monazite, phosphate ore, tungsten ore sand, tin, tantalum niobium ore, tantalum niobium ore or other non-ferrous metal ores, rare mineral metals and non-metallic minerals with gravity difference. This machine also has advantages such as stable selection process, easy operation, wide range of allowable changes in feed density, high enrichment, high recovery rate, small footprint, low water consumption, simple structure, no need for power, large processing capacity, easy installation, easy operation, low investment, and quick effectiveness. 4. According to the particle size of the processed ore, the chute can be divided into three categories: (1) Coarse grained spiral chutes, with a maximum particle size of 2-3 millimeters or more for ore feeding, and a maximum of 100-200mm. (2) Mineral sand chute, processing 2-3 mm particle size mineral materials. (3) Slime spiral chute, feeding Granularity<0.074MM. 5、 The application range of fiberglass chute is 0.6-0.03mm for processing vein ore and ore sand, but it is unfavorable for sorting when the mud content is high. Nowadays, it has been widely used in the treatment of iron, tungsten, sand tin, tantalum niobium, coastal and riverbed mineral sand and sand gold. Material spiral chute Material spiral chute

Spiral chute for plastic material