Spiral chute processing equipment

Spiral chute processing equipment

Spiral Chute Processing Equipment 1. Overview: Gravity Separation Spiral Chute summarizes the characteristics of spiral concentrators, spiral concentrators, shakers, and centrifugal concentrators. After being evaluated by relevant scientific research, design, university, and concentrator departments organized by the Ministry of Metallurgy, it is recognized that this type of machine has superior performance, advanced sorting indicators, and has won the Science and Technology Research Achievement Award from the Ministry of Metallurgical Industry. It has been widely used in non-ferrous and black mining metals. This machine is suitable for separating fine materials with Granularity of 0.3-0.02mm to obtain iron, ferrotitanium, ferrochrome, pyrite, zircon sand, Rutile, monazite, phosphate rock, tungsten ore, placer tin ore, tantalum niobium ore, niobium ore and other non-ferrous metals, rare mineral metals and nonferrous metal mineral bodies with different specific gravity. 2、 The mortar with the same working principle is slowly fed to the surface of the spiral groove through the feeding groove installed at the end of the rotating groove head, and sorting is carried out. The tail end of the rotating groove is equipped with a valve block type product cutting groove, allowing the selected equipment to be divided into three types according to grade along the radial direction. By adjusting the position of the valve block to change the selection width of each product, the equipment gathering hopper will collect and export the obtained multi head ore flow. The transverse plane of the spiral chute and the different slopes of the curves are particularly suitable for the separation of small particles of mineral materials. Spiral Chute Processing Equipment III. Advantages and Features 1. Stable, easy to operate, and with a large density range. 2. The material processing yield is large, the enrichment ratio is high, and the recycling rate is high. 3. The space occupation is not large, the water consumption is low, the structure is simple and simple, and there is no need for power. 4. Easy installation, easy operation, low investment, and fast returns. Spiral chute processing equipment 4. Structural composition: The spiral chute is composed of 6 parts, including a feeding homogenizer, a feeding chute, a rotating groove, a product cutting groove, an equipment gathering hopper, and a groove support (including a cross or triangular frame). The spiral groove connected by the rotating plate is a key accessory. The spiral plate is made of fiberglass (fiberglass reinforced coal gangue) and connected together through screws. The sorting surface of the rotating groove has one layer of pre designed durable wear-resistant layer. It has the advantages of lightweight, sturdy, and durable consumer goods. The spiral groove is equipped with a multi tube feeding homogenizer to screen minerals evenly, which is not cumbersome to operate. The mineral sorting equipment is freely stacked on the cross (or tripod) of the support table. The evenly distributed mortar is slowly fed to the spiral groove surface through the feeding groove installed at the head of the rotating groove, and the selection is carried out. The bottom of the rotating groove is installed in a valve block type new equipment to obtain the groove, allowing the sorted new products to be divided into three (or four) new products according to grade along the radial direction. Change the selection width of each new device by adjusting the position of the valve block. The new product gathering bucket is a concentric circular tube that distinguishes and converges the intercepted multi head ore flow. The cross-section of the fiberglass chute and the change in slope of the curve are particularly applicable for the selection of fine-grained materials. 5、 The fiberglass spiral chute is suitable for processing 0.6-0.03MM and vein or placer ores, but it is unfavorable for sorting when the mud content is high. Now it has been widely used for processing iron ore, tungsten, tin ore, niobium tantalum ore, coastal and riverside ore sands, and gold mines. Spiral chute processing equipment Spiral chute processing equipment

Spiral chute processing equipment