Spiral chute layout method

Spiral chute layout method 1. Introduction: The fiberglass spiral chute integrates the characteristics of spiral chutes, spiral chutes, shakers, and centrifugal concentrators. It has been evaluated and approved by relevant scientific research, design, universities, and mining units organized by the Ministry of Metallurgy. It is believed that this type of machine has excellent performance, improved sorting indicators, and won the Science and Technology Research Achievement Award from the Ministry of Metallurgy Industry. It has been widely used in non-ferrous and black mining metals. This machine is suitable for separating iron ore, Ilmenite, Chromite, pyrite, zircon ore, Rutile ore, monazite ore, phosphorus, tungsten ore, tin ore, tantalum niobium, niobium ore and other nonferrous metal ores, rare mineral metals or nonferrous metal mineral bodies with density and specific gravity difference from small materials with a Granularity of 0.3-0.02 mm. 2、 The technical principle is that the mineral mortar is slowly fed onto the rotating groove surface through a feeding groove installed at the head of the spiral groove for sorting. The tail of the spiral groove is equipped with a valve type product selection groove, which divides the selection equipment into three categories according to grade along the radial direction. By adjusting the orientation of the valve block to change the cutting width of each product, the equipment gathering hopper enables the multi-directional mineral flow to be differentiated and converged. The transverse surface of the fiberglass chute and the slope change of the curve are particularly suitable for the selection of fine particle materials. Spiral chute layout method 3. Characteristics or advantages 1. Super large, strong processing capacity, modern processing mineral objective conditions through large-scale to create benefits. 2. Fine granulation: for the treatment of fine particle level minerals, the Granularity is -0.047MM, and the original equipment can generally ensure the recovery of+0.047mm. 3. With the development of Hydraulics, two-phase flow and machine vibration, spiral chutes have developed from simple use of gravity and flow resistance to composite use of centrifugal force, equipment vibration force, magnetic force, etc. By using a composite force field, the enrichment of useful minerals and the separation of fine and fine particles are increased, thereby improving the ore recovery rate. 4. With energy conservation and environmental protection as the fundamental starting point, the area and space should be small, and the water and electricity consumption should be small. 5. Simple and flexible operation, stable sorting process, simple structure, convenient for Computerized maintenance management system. Spiral chute layout method 4. According to the particle size of the processed ore material, the chute can be divided into three types: (1) Coarse grained chute, with a maximum particle size of 2-3mm or more for ore feeding, and a maximum of 100-200mm. (2) The ore sand chute is used to handle 2-3mm sized ore materials. (3) Slurry chute, feeding Granularity is less than 0.074MM. 5、 This machine is suitable for separating iron ore, Ilmenite, chromite, pyrite, zircon sand, Rutile, monazite, phosgenite, tungsten, sand tin, tantalite, tantalum niobium or other nonferrous metals, rare ore metals or nonferrous metal mineral bodies with different density and specific gravity from fine and small materials with Granularity of 0.3-0.02MM. Spiral Chute Layout Method Spiral Chute Layout Method