Gravity beneficiation spiral chute

Gravity beneficiation spiral chute

Gravity beneficiation spiral chute 1. Introduction: Gravity beneficiation spiral chute is a combination of gravity beneficiation spiral chute, fiberglass spiral chute, shaking table, and beneficiation centrifuge. After relevant scientific research organized by the Ministry of Metallurgical Industry, appraisal by departments such as design, university, and this beneficiation company, it is recognized that this equipment has excellent performance and progress in beneficiation indicators. At the same time, it has won the Science and Technology Research Achievement Award from the Ministry of Metallurgical Industry. It has now been awarded in the field of non-ferrous metals Ferrous mines are very versatile. This product is suitable for sorting iron ore, ferrotitanium, ferrochrome, pyrite, zircon, Rutile, monazite, ethylene phosphate, tungsten, tin placer, tantalum, tantalum niobium and other nonferrous metal ores, rare ore metals and non-metallic ore bodies with density and specific gravity differences. 2、 Technical principle: The spiral chute mineral separator is freely stacked on a cross (or tripod) on a support table. The uniform slurry is slowly fed to the surface of the spiral groove through the feeding groove installed at the head of the rotating groove, and sorting is carried out. The tail end is equipped with a valve block type equipment cutting groove, allowing the sorted products to be divided into three types (or four types) according to grade along the radial direction. Adjust the position of the valve block to change the selection width of each device. The product gathering bucket is a concentric circular tube that aggregates and leads out the obtained multi head ore flow. The transverse section of the fiberglass chute and the slope change of the curve are particularly applied to the sorting of fine particle materials. gravity beneficiation spiral chute III. Characteristics and highlights 1. Heavy duty, strong processing capacity, and the objective conditions for contemporary mineral processing are to create benefits through economies of scale. 2. Fine granulation is used for the treatment of fine particle grade mineral materials, especially for minerals with a particle size of -0.047 millimeters. The original equipment can generally guarantee the recovery of particles with a particle size of+0.047 millimeters. 3. With the development of Hydraulics, two-phase flow, equipment vibration, etc., the spiral concentrator has developed from simple application of gravity and flow resistance to the level of composite utilization of centrifugal force, machine vibration force, magnetic force, etc. By using a composite force field, the enrichment of useful mineral materials or the separation of fine and micro particles can be increased, thereby improving the mineral recovery rate. 4. The basic starting point is to save energy, reduce consumption and environmental protection. The land area and space occupied should be small, and the water consumption and power consumption should be small. 5. Easy and flexible operation, stable sorting steps, simple structure, and convenient maintenance and management. Gravity beneficiation spiral chute IV. According to the Granularity of the ore processed, the chute can be divided into three categories: (1) Coarse size chute. The maximum Granularity of the feed is more than 2-3 mm, and the maximum can reach 100-200 mm. (2) The ore chute is used to handle 2-3mm sized ore materials. (3) Slurry chute, with a feeding particle size less than 0.074MM. 5、 Use This machine is suitable for sorting iron ore, ferrotitanium ore, chromite ore, pyrite ore, zircon ore, Rutile, monazite, phosphate ore, tungsten ore, tin, tantalum niobium, niobium with a particle size of 0.3-0.02mm and other non-ferrous metal ores, rare metals and non-metallic ore bodies with different density and specific gravity. Gravity beneficiation spiral chute Gravity beneficiation spiral chute

Gravity beneficiation spiral chute