How to manufacture spiral chutes

How to manufacture spiral chutes

How to manufacture spiral chutes? 1. Describe how the beneficiation chute belongs to the inclined flow separation process. Mortar is provided on a inclined chute or slope. Under the driving force of flowing water, the mineral particle group is not tight and layered. The upper layer of light minerals is quickly discharged from the groove, while the lower layer of minerals with a significant proportion are retained in the groove or discharged from the bottom at low speed. After being distinguished and connected, fine ore dressing or tailings can be obtained., How to manufacture fiberglass spiral chutes is a mechanical tool for mining and mineral processing, especially for mineral mining and selection on beaches, riverbanks, sandbanks, and river beds. The equipment has the characteristics of suitable structure, simple installation, small footprint, simple operation, stable beneficiation, clear beneficiation, large production capacity, high efficiency, high concentration ratio, high recovery rate, and reliable operation. And it has the advantages of light weight, moisture resistance, rust prevention, corrosion resistance, strong applicability to fluctuations in ore feed volume, concentration, particle size, and grade. 2、 Application Skills. Set up the glass fiber reinforced plastic spiral chute, align it with the vertical line, use an iron shelf or wood to fix it in a suitable position, use the sand pump to transport the mineral sand to the two ore feeding ports above the spiral, add make-up water, and adjust the concentration of the mineral slurry. The mineral slurry naturally swirls from high to low, and a single coherent centrifugal force appears in the rotating slant flow rate. The difference in the gravity, Granularity and shape of the mineral sand is obtained, By utilizing the gravity and centrifugal force of the swirling flow, the sand and ore are separated, and the selected ore is discharged into the concentrate hopper and connected out through pipelines. The tailings enter the tailings hopper and are connected to the sand tank through pipelines, and then discharged by a mortar pump, completing the entire process of beneficiation. How to make spiral chute. How to make spiral chute This product is suitable for sorting iron ore, ferrotitanium ore, chromite ore, pyrite ore, zircon ore, Rutile, monazite, phosphorus ethylene, tungsten ore, sand tin, tantalum, niobium ore and other nonferrous metals, rare metals and non-metallic ore bodies with density and specific gravity difference of 0.3-0.02MM fine materials. This equipment also has advantages such as stable and easy operation in the selection process, a wide range of allowable changes in feed density, high enrichment ratio, high recovery rate, small footprint, low water consumption, simple structure, no need for power, strong processing ability, easy installation and operation, low investment, and quick effectiveness. How to Make a Spiral Chute at 4. Structural Composition. Spiral chutes are all composed of a feeding homogenizer, a cross (tripod), a feeding chute, a spiral groove, a cutting groove, a gathering bucket, and a groove pillar. 5、 Introduction to the use of range spiral chute technology. The glass fiber reinforced plastic chute is suitable for separating fine grained iron ore, ilmenite ore, chromite ore, pyrite ore, tin, tantalum niobium ore, placer gold ore, coal mine, monazite ore, Rutile ore, zircon, rare earth ore, and has enough Density contrast to obtain other metal and non-metallic ores. How to Make a Spiral Chute How to Make a Spiral Chute

How to manufacture spiral chutes