Spiral chute re selection process method

Spiral chute re selection process method

Spiral chute re selection process method. 1、 Product Overview: A gravity beneficiation equipment that utilizes the continuous centrifugal force generated by mortar in rotary spiral motion to achieve lightweight and heavy mineral separation. 2、 Use skills to make the spiral concentrator stand up, align it with the vertical line, use an iron shelf or wood to stabilize it in a suitable position, use the sand pump to transport the ore sand to the two feeding ports on the spiral head, add make-up water, and adjust the concentration of the ore slurry. The mineral slurry naturally swirls from high to low, and an inertial centrifugal force occurs in the flow rate of the swirling inclined surface to obtain the difference in gravity, Granularity and shape of the sand ore, By achieving the efficiency of gravity or centrifugal force through swirling flow, the ore and sand are separated, and the concentrate is discharged into the beneficiation hopper and connected out through pipelines. The tailings flow into the tailings hopper and are connected to the sand pit through pipelines, and then discharged by a mortar pump, completing the entire beneficiation process. spiral chute re selection process method, three advantages and characteristics: 1. Stable, easy to control, and a relatively large concentration range. 2. The production and processing capacity of mineral materials is strong, with high enrichment and high recovery rate. 3. It takes up little space, consumes little water, has a simple structure, and does not require power. 4. Installation is simple, easy to operate, with minimal investment and fast efficiency recovery. Spiral chute re selection process method . 4、 The spiral chute is composed of six parts: a feeding homogenizer, a feeding trough, a rotating trough, a product acquisition trough, an equipment gathering hopper, and a trough bracket (including a cross or triangular frame). The spiral groove formed by connecting the spiral pieces is a key component. The rotating plate is made of fiberglass (fiberglass reinforced coal gangue) and connected together by screws. The selection surface of the rotating groove has a pre made wear-resistant layer. She has the advantages of lightweight, sturdy, and durable consumer goods that are not easily damaged. The head of the spiral groove is equipped with a multi tube feeding homogenizer to sort minerals evenly, which is not cumbersome to operate. The mineral sorting device is freely placed on the cross (or tripod) of the support table. The evenly divided mortar is slowly fed onto the surface of the spiral groove through the feeding chute at the head end of the rotating groove for sorting. The tail of the rotating groove is installed in a valve block type new product selection groove, allowing the selection of new equipment to be divided into three (or four) types of new products radially according to grade. Change the cutting width of each new device by adjusting the position of the valve block. The new product gathering bucket is a concentric circular tube that distinguishes and converges the obtained multi head ore flows. The horizontal plane of the spiral concentrator, with a change in the slope of the curve, is particularly suitable for the separation of small particle ore materials. 5、 The use of fiberglass chutes in the field is suitable for processing 0.6-0.03MM and vein ores as well as minerals, but it is unfavorable for sorting when the mud content is high. It is now widely used for processing iron ore, tungsten, sand tin, tantalum niobium ore, bay and riverbed ore sand or placer gold, and so on. Spiral chute reselection process method Spiral chute reselection process method

Spiral chute re selection process method