Spiral chute life

Introduction to the service life of spiral chutes. Spiral Chute Life Spiral Chute combines the characteristics of spiral chutes, fiberglass spiral chutes, shakers, and centrifugal gold concentrators. After scientific research organized by the Ministry of Metallurgy, design, operation and appraisal by departments such as universities and concentrators, it is recognized as having excellent performance, advanced sorting objectives, and has won the Science and Technology Research Achievement Award from the Ministry of Metallurgical Industry. It has been widely used in non-ferrous and black mining metals. This machine can be used to separate iron, ferrotitanium, ferrochrome, pyrite, zircon, Rutile, monazite, phosgenite, wolframite, placer tin, tantalite, tantalum niobium ore or other nonferrous metals, rare mineral metals and nonferrous metal minerals with different density and specific gravity. 2、 The mineral mortar with uniform technical principles is slowly fed onto the surface of the rotating groove through the feeding chute installed at the end of the spiral groove head, and then sorted. The bottom of the spiral groove is equipped with a valve block type product selection groove, which divides the selected equipment into three categories according to grade along the radial direction. By adjusting the orientation of the valve block to change the cutting width of each product, the equipment gathering bucket allows the obtained variable mineral flow to converge and lead out. The change in slope of the curve on the transverse surface of the fiberglass chute is particularly applicable for the sorting of fine-grained materials. Spiral Chute Life 3. Advantages and Characteristics 1. Extremely high efficiency, high recycling rate, and precise screening of ore. 2. No power required; 3. Lightweight, rust resistant, wear-resistant, and corrosion-resistant; 4. Low cost and long application life; 5. Strong adaptability to fluctuation of ore feeding amount, concentration, Granularity and grade; The frictional force formed on the surface of 6 diamond sand makes the beneficiation efficiency better than other plastic surfaces. The spiral chute has a lifespan of square cabins and is a wall mounted spiral chute manufacturer. Fourthly, the structure of the spiral concentrator consists of a feeding equalizer, a cross (tripod), a feeding chute, a rotating chute, a selection chute, a gathering bucket, and a trough support. 5、 The use of a range spiral concentrator is suitable for processing 0.6-0.03mm or vein ore and minerals, but it is unfavorable for separation when the mud content is high. Nowadays, it is widely used for processing iron ore, tungsten, tin, tantalum niobium ore, bay or riverbank ore sand, and gold ore. Spiral chute lifespan Spiral chute lifespan