Spiral chute design software

Spiral chute design software

Spiral chute design software 1. Explain that chute sorting includes the inclined surface flow sorting process. Mortar is fed to some inclined grooves or slopes. Under the push of water flow, the mineral particle group becomes loose and layered. The upper layer of light mineral material is quickly discharged from the outside of the groove, while the lower layer of heavy mineral is retained inside the groove or slowly discharged from the bottom. After each is taken, the selected ore and tailings can be obtained. Spiral chute design software, fiberglass chute, is a mining and beneficiation machine, especially ideal for sand mining and beneficiation on beaches, rivers, sand banks, and streams. The equipment has the characteristics of appropriate structure, simple installation, small footprint, easy operation, stable beneficiation, clear screening of minerals, large production capacity, high efficiency, high beneficiation enrichment ratio, high recycling rate, and stable operation. And it has advantages such as light weight, moisture prevention, rust prevention, strong corrosion resistance, and strong adaptability to fluctuations in feed volume, concentration, particle size, and grade. 2、 Technical principle: The spiral chute separator is not limited to being placed on the cross (or tripod) of the support table. Equal slurry is slowly fed to the spiral groove surface through the feeding chute at the end of the rotating groove head for sorting. The bottom is equipped with a valve block type equipment acquisition slot, allowing other products to be divided into three types (or four types) according to grade along the radial direction. Change the selection width of each device by adjusting the position of the valve block. The product gathering bucket is a concentric circular tube that collects and exports the intercepted variable mineral flows separately. The transverse surface of the fiberglass chute has a very variable slope, which is suitable for the selection of fine particle materials. Spiral Chute Design Software III. Features. Fiberglass spiral chute has attracted more attention among many gravity separation machines due to its low power consumption, simple structure, small area occupation, simple operation, stable beneficiation, clear beneficiation, no moving parts, convenient Computerized maintenance management system, large processing capacity per unit area and other characteristics. The machine has a wide and relatively stable groove surface, and the mortar has a large area of laminar flow, which is more suitable for processing ores with medium and fine (-4mm) Granularity. Glass fiber reinforced plastic chutes with diameters of 400, 600, 900, and 1200MM have been manufactured domestically, Ф The production capacity of 1200mm four heads is about 4-6 tons/hour. Spiral chute design software 4. Structure composition. The fiberglass spiral chute is composed of six parts, including a feeding homogenizer, a feeding chute, a spiral groove, an equipment acquisition groove, a product gathering hopper, and a bracket (including a cross or triangular frame) for this groove. The rotating groove connected by the rotating disc is the main accessory. The spiral plate is made of fiberglass (fiberglass reinforced coal gangue) and is bolted together. The spiral groove has a pre made durable wear-resistant layer on the selected surface. She has the advantages of lightweight, strong, and durable consumables. The head of the rotating groove is equipped with a multi tube ore feeding homogenizer to divide the ore dressing evenly, and the control is not cumbersome. The mineral sorting machine is freely stacked on a cross (or tripod) on a supporting table. The evenly divided slurry is slowly fed to the rotating groove surface through the feeding groove installed at the end of the spiral groove head, and sorting is carried out. The tail end of the spiral groove is installed in a valve block type new product selection groove, and the selected new products are divided into three (or four) types of new equipment along the radial direction according to grade. Change the cutting width of each new product by adjusting the orientation of the valve block. The new product gathering bucket is a concentric circular tube that allows the diverse mineral flows obtained to converge and export differently. The transverse plane and slope of the spiral chute are very suitable for selecting small particle materials. 5、 Purpose. This equipment is suitable for separating iron ore, Ilmenite, Chromite, pyrite, zircon sand, Rutile ore, monazite, phosphorus, tungsten ore, tin ore, tantalum, tantalum niobium ore, and other nonferrous metals, rare minerals, gold or non nonferrous metal mineral bodies with different specific gravity from fine and small materials with a Granularity of 0.3-0.02MM. Spiral chute design software Spiral chute design software

Spiral chute design software