Tin tungsten ore gravity separation equipment

Tin tungsten ore gravity separation equipment

Tin tungsten ore is a metal mineral resource with important strategic significance, widely used in military, aerospace, electronics and other fields. The gravity separation of tin tungsten ore is an important means to improve the grade of tin tungsten ore, improve recovery rate, and reduce production costs. This article will introduce the operating steps and usage precautions of the tin tungsten ore gravity separation equipment.

1、 Types of Tin Tungsten Ore Gravity Separation Equipment

The gravity separation equipment for tin tungsten ore mainly includes gravity concentrators, flotation machines, magnetic separators, etc. Gravity concentrator is a device that uses gravity to separate ores, suitable for coarse grained tin tungsten ore. A flotation machine is a device that uses bubbles to separate mineral particles from water, suitable for fine-grained tin tungsten ores. Magnetic separator is a device that uses magnetism to separate minerals, suitable for tin tungsten ore containing magnetic minerals.

2、 Operating Steps of Tin Tungsten Ore Gravity Separation Equipment

1. Operating steps of gravity concentrator

(1) Put the tin tungsten ore into the hopper and evenly feed it into the concentrator through a vibrating feeder.

(2) Adjust the tilt angle and water flow rate of the concentrator to separate the ore in the concentrator.

(3) Collect the separated ore, and after drying, grinding, and other processing, obtain high-grade tin tungsten ore concentrate.

2. Operation steps of flotation machine

(1) Grind the tin tungsten ore into fine powder, then add reagents and water to mix and stir.

(2) Start the flotation machine, inject the mixture of reagents and water into the flotation cell, and then open the air valve to inject bubbles into the cell.

(3) Mineral particles combine with bubbles and float upward to form a foam layer. Mineral particles on the foam layer are collected.

(4) The collected foam layer is sent to the concentration tank, and then filtered and dried to obtain high-grade tin tungsten ore concentrate.

3. Operating steps of magnetic separator

(1) Crush the tin tungsten ore into small pieces, and then feed the ore into a magnetic separator through a feeder.

(2) Turn on the magnetic separator, adjust the magnetic field strength and direction, so that magnetic minerals are adsorbed on the magnetic poles.

(3) Scrape off the mineral particles adsorbed on the magnetic pole, undergo drying, grinding, and other processing to obtain high-grade tin tungsten ore concentrate.

3、 Precautions for the use of tin tungsten ore gravity separation equipment

Before using the tin tungsten ore gravity separation equipment, it is necessary to inspect and maintain the equipment to ensure its normal operation.

2. In the use of tin tungsten ore gravity separation equipment, it is necessary to follow the operating steps to avoid equipment damage caused by operational errors.

After the use of tin tungsten ore gravity separation equipment, it is necessary to clean and maintain the equipment well to extend its service life.

4. During the use of tin tungsten ore gravity separation equipment, safety precautions should be taken to avoid accidents.

In short, tin tungsten ore gravity separation equipment is an important means to improve the grade of tin tungsten ore, improve recovery rate, and reduce production costs. When using tin tungsten ore gravity separation equipment, it is necessary to follow the operating steps, follow the usage precautions, ensure the normal operation of the equipment, improve production efficiency, and reduce production costs.

Tin tungsten ore gravity separation equipment