Tungsten ore gravity separation shaker

Tungsten ore gravity separation shaker

The tungsten ore gravity separation shaker is a common beneficiation equipment widely used in the beneficiation and processing of tungsten ore. This article will introduce the working principle, operating steps, and precautions of the tungsten ore gravity separation shaker.

1、 Working principle

The tungsten ore gravity separation shaker is a device that uses gravity and inertial forces to separate ores. The ore exhibits different sorting effects on the shaking table, and different mineral qualities are sorted based on the density and particle size of the ore.

2、 Operating Steps

1. Preparation work

Firstly, it is necessary to check the integrity of all components of the equipment, especially the support structure and transmission components of the reselection shaker. At the same time, it is necessary to clean and lubricate the equipment to ensure its normal operation.

2. Adjusting the equipment

The adjustment of the tungsten ore gravity separation shaker is very important. Before adjusting, it is necessary to select the appropriate shaking table angle, frequency, and amplitude based on the properties and requirements of the ore. At the same time, it is necessary to adjust the feed volume and water volume based on the particle size and density of the ore to achieve the best separation effect.

3. Operating equipment

After the adjustment is completed, it is necessary to evenly place the ore at the feeding port and then start the equipment. During the operation of the equipment, it is necessary to continuously observe the sorting effect of the ore and make adjustments as needed. At the same time, attention should be paid to the operation of the equipment, such as whether the vibration is normal and whether the transmission parts are abnormal.

4. Maintenance equipment

After the equipment operation is completed, maintenance needs to be carried out on the equipment. Firstly, it is necessary to clean the slag and debris inside the equipment, and then lubricate and maintain the equipment. At the same time, it is necessary to inspect the equipment to identify and eliminate potential faults and problems.

3、 Precautions

1. When operating equipment, it is necessary to strictly follow safety operating procedures to prevent accidents from occurring.

When adjusting the equipment, it is necessary to select appropriate parameters based on the properties and requirements of the ore to achieve the best sorting effect.

3. During the operation of the equipment, it is necessary to pay attention to the operation of the equipment and promptly identify and eliminate faults.

When maintaining equipment, it is necessary to clean, lubricate, and maintain the equipment to extend its service life.

In short, the tungsten ore gravity separation shaker is an important beneficiation equipment that can effectively separate minerals of different qualities, improve the grade and recovery rate of the ore. When operating equipment, it is necessary to strictly follow safety operating procedures, pay attention to equipment adjustment and maintenance, to ensure the normal operation of the equipment.

Tungsten ore gravity separation shaker