Tungsten ore beneficiation equipment Shaker

Tungsten ore beneficiation equipment Shaker

Tungsten ore beneficiation equipment, a shaking table, is a common beneficiation equipment mainly used for the separation of tungsten ore in the beneficiation industry. In the process of tungsten ore beneficiation, a shaking table is a very important part, which can separate useful minerals from waste rock in the ore, thereby improving the grade and recovery rate of tungsten ore. This article will introduce the operating steps and precautions of the tungsten ore beneficiation equipment shaker.

1、 Operating steps of tungsten ore beneficiation equipment shaking table

1. Preparation work

Before conducting the shaking table operation of tungsten ore beneficiation equipment, it is necessary to first carry out preparatory work. This includes cleaning the equipment, checking if it is in good condition, and preparing the necessary tools and materials.

2. Adjust the angle of the shaking table

Place the tungsten ore beneficiation equipment shaker on a level ground and adjust its angle. In general, the angle of the shaking table should be between 2-5 degrees, and the specific angle needs to be determined based on the nature of the ore and the model of the shaking table.

3. Adding ore

Place the tungsten ore to be processed evenly in the feed chute of the shaking table, taking care not to exceed the bearing capacity of the equipment.

4. Adjust water flow

Turn on the faucet and adjust the water flow to the appropriate size so that the water can wash the ore to one end of the rocking bed.

5. Turn on the shaker

Press the start button of the shaker to start the device. After the shaker starts working, the ore will move towards one end of the shaker under the action of water flow, useful minerals will deposit on the shaker, and waste rock will be washed to the other end of the shaker.

6. Collect minerals

After the ore is separated by the shaker, useful minerals will deposit on the shaker and can be collected using a scraper or brush. Waste rock can be discharged through the discharge port.

2、 Precautions for Shaker of Tungsten Mineral Processing Equipment

1. Choose the appropriate shaking table model

Different models of tungsten ore beneficiation equipment are suitable for different types of ores, so when selecting a shaker model, it is necessary to determine based on the properties of the ore and beneficiation requirements.

2. Adjust the water flow and angle properly

The adjustment of water flow and angle is very important for the operation of the tungsten ore beneficiation equipment shaker, which needs to be determined based on the properties of the ore and the model of the shaker.

3. Keep the equipment clean

The shaking table of tungsten ore beneficiation equipment requires frequent cleaning and maintenance to ensure its normal operation and extend its service life.

4. Pay attention to safety

When operating the shaking table of tungsten ore beneficiation equipment, it is necessary to pay attention to safety and avoid accidents.

summary

The shaking table is an important equipment for tungsten ore beneficiation, which can separate useful minerals from waste rock in the ore, thereby improving the grade and recovery rate of tungsten ore. When operating the tungsten ore beneficiation equipment shaker, it is necessary to determine the water flow and angle based on the properties of the ore and the model of the shaker, and pay attention to the cleanliness and safety of the equipment.

Tungsten ore beneficiation equipment Shaker