How to manufacture spiral chutes

How to manufacture spiral chutes

How to manufacture a spiral chute? 1. Describe the beneficiation chute, including the slope flow sorting process. The mortar is fed to some inclined grooves or slopes, and with the help of flowing water, the mineral particle group is not tight and layered. The lighter mineral material on the upper part is quickly discharged to the outside of the groove, while the heavy mineral on the lower layer is retained in the groove or discharged from the bottom at low speed. After receiving the difference, the selected ore or tailings can be obtained. Fiberglass spiral chutes are machinery for mining and beneficiation, especially ideal for sand mining in bays, rivers, sandbanks, and streams. The product also has the characteristics of appropriate structure, simple installation, small footprint, simple operation, stable beneficiation, clear mineral separation, high yield, high efficiency beneficiation and enrichment ratio, high recovery and utilization rate, and reliable operation. It has the advantages of light weight, moisture prevention, rust prevention, durability and corrosion resistance, and strong applicability to the fluctuation of feed volume, density, Granularity, and grade. 2、 The spiral chute shall be set up by means of method, the vertical line shall be calibrated, the iron frame or wood shall be used to stabilize at the appropriate position, the sand ore shall be transported to the two ore feeding ports on the spiral roof by the slurry pump, the water shall be added, the concentration of mineral slurry shall be adjusted, the slurry shall naturally rotate from high to low, and a single coherent centrifugal force shall be generated in the rotating slope flow speed, and the difference in density, specific gravity, Granularity and morphology of the sand ore shall be obtained, Through the gravity and centrifugal force of the swirling flow, the sand and ore are separated. The selected ore is discharged into the concentrate hopper and connected out through pipelines. The tailings flow into the tailings hopper and are transported to the sand pit through pipelines. Then, they are discharged by a mortar pump, completing the entire beneficiation process. How to manufacture a spiral chute? 3. Characteristics or highlights. 1. Heavy duty and large processing capacity. Contemporary mineral material processing generally requires the use of scale effects to create benefits. 2. Fine granulation: for the treatment of fine and small particle size minerals, especially the treatment of ore materials with a particle size of -0.047MM, the original machinery can basically ensure the recovery of+0.047MM Granularity. 3. With the development of Hydraulics, two-phase flow, equipment vibration, etc., GRP spiral chute has developed from simple use of gravity and water blocking force to composite centrifugal force, mechanical vibration force, magnetic separation force, etc. Through a composite force field, the enrichment of useful minerals and the separation of fine and fine particles are enhanced, thereby increasing the ore recovery rate. 4. Based on energy conservation, consumption reduction and environmental protection, it should occupy a small area and space, and consume less water and electricity. 5. Simple and flexible operation, stable sorting process, simple structure, convenient for Computerized maintenance management system. How to make a spiral chute 4. According to the particle size of the processed mineral materials, the chute can be divided into three types: (1) coarse spiral chute. The maximum Granularity of the feed is more than 2-3mm, and the maximum can be 100-200mm. (2) Mineral sand chute, processing 2-3MM particle grade mineral aggregate. (3) The spiral chute of the ore slurry has a feeding particle size of less than 0.074 millimeters. 5、 The fiberglass spiral chute is suitable for processing 0.6-0.03mm and vein and placer ores, but it is unfavorable for sorting when the mud content is high. It is now widely used for processing iron ore, tungsten, tin, niobium tantalum ore, coastal and river sand, and placer gold, among others. How to Make a Spiral Chute How to Make a Spiral Chute

How to manufacture spiral chutes