How to make a semi spiral chute

How to make a semi spiral chute

What to do with the semi spiral chute? First, it shows that the spiral chute is a combination of the characteristics of the spiral concentrator, gravity separation spiral chute, shaker, gold concentrator centrifuge. After the Ministry of Metallurgical Industry organized relevant scientific research, and the design, universities, concentrators and other units passed the operation appraisal, it believes that the mechanical performance is excellent, the separation goal is improved, and it has won the scientific and technological research achievement award of the Ministry of Metallurgical Industry. Now it is widely used in non-ferrous and Ferrous mines. This equipment is used to separate iron ore, ilmenite, chromite, pyrite, zircon, Rutile, monazite, phosphorus, tungsten, tin, tantalum niobium, niobium and other non-ferrous metal ores, rare metals and non-metallic minerals with gravity difference from fine materials with a particle size of 0.3-0.02 mm. 2、 The glass fiber reinforced plastic spiral chute shall be set up with skills, aligned with the vertical line, and fixed in a suitable position with iron shelves or wood. The sand pump shall be used to transport the mineral sand to the two ore feeding ports above the spiral, add make-up water, and adjust the concentration of the mineral slurry. The mineral slurry naturally swirls from high to low. A single coherent centrifugal force appears in the rotating slope flow rate, and the difference in the gravity, Granularity and shape of the mineral sand is obtained, By utilizing the gravity and centrifugal force of the swirling flow, the sand and ore are separated, and the selected ore is discharged into the concentrate hopper and connected out through pipelines. The tailings enter the tailings hopper and are connected to the sand tank through pipelines, and then discharged by a mortar pump, completing the entire process of beneficiation. How to Make a Half Spiral Chute? Highlights and Features: 1. Ultra high efficiency, high recovery rate, and precise ore separation; 2. No power required; 3. Lightweight, rust resistant, wear-resistant, and corrosion-resistant; 4. Low operating cost and long service life; 5. Strong adaptability to fluctuations in ore feed volume, concentration, particle size, and grade; The friction force formed by the surface of 6 diamond sand makes the beneficiation effect superior to other plastic surfaces. How to make a semi spiral chute 4. Structural composition: The fiberglass chute is composed of six parts: a feeding distributor, a feeding groove, a rotating groove, an equipment cutting groove, a product gathering hopper, and a groove bracket (including a cross or triangular frame). The spiral groove formed by the connection of spiral plates is a key component. The rotating plate is made of fiberglass (fiberglass reinforced coal gangue) and is bolted together. The selected surface of the rotating groove has a pre designed durable wear-resistant layer. It has the advantages of being lightweight, sturdy, durable, and not easily damaged consumer goods. The spiral groove is equipped with a multi tube feeding homogenizer to divide ore evenly, making it easy to operate. The concentrator is not limited to being placed on the cross (or tripod) of the support table. The evenly divided mineral mortar is slowly fed onto the spiral groove surface through the feeding chute at the head of the rotating groove for sorting. The tail of the rotating groove is installed in a valve type new product selection groove, and the selected new products are divided into three types (or four types) of new equipment along the radial direction according to grade. Change the width of each new product by adjusting the position of the valve block. The new product gathering bucket is a concentric circular tube that allows the intercepted multi-directional mineral flow to converge and lead out. The cross section of the spiral chute and the different slopes of the curves are very suitable for sorting fine particle materials. 5、 The application scope of FRP chutes is to separate fine iron ore, Ilmenite, Chromite, pyrite, tin, tantalum niobium, gold, coal, monazite, Rutile, zircon sand, rare earth and other metal and non nonferrous metal minerals with completely sufficient density and gravity difference. How to Make a Half Spiral Chute How to Make a Half Spiral Chute

How to make a semi spiral chute