Binhai Zirconium Sand Gravity Separation Production Line

Binhai Zirconium Sand Gravity Separation Production Line

In recent years, zirconium placer has become one of the important non-metallic mineral resources in China. As one of the zirconium sand mineral areas in China, the coastal area has abundant reserves of zirconium sand resources. However, due to the high content of impurities in its ore, it needs to be re selected. This article will introduce the operating steps of the gravity separation production line for coastal zirconium sand ore, helping readers better understand the gravity separation production line for zirconium sand ore.

1、 Overview of the Gravity Separation Production Line for Binhai Zirconium Sand Mine

The gravity separation production line of Binhai Zirconium Sand Mine mainly includes equipment such as jaw crusher, cone crusher, ball mill, spiral classifier, high-frequency screen, etc. Among them, jaw crusher is mainly used for preliminary crushing of ore, cone crusher is used for further fine crushing of ore, ball mill is used for fine grinding of ore, spiral classifier is used for grading of grinding, and high-frequency screen is used for screening of grinding.

2、 Operating Steps of the Gravity Separation Production Line for Binhai Zirconium Sand Mine

1. Operation of jaw crusher

The jaw crusher is the first process of the gravity separation production line for coastal zirconium sand ore, which is used to preliminarily crush the ore. The specific operation steps are as follows:

(1) Before opening the jaw crusher, it is necessary to check whether the equipment operates normally and whether the motor, belt, bearing and other parts are in good condition.

(2) Place the ore that needs to be crushed into the feed port of the jaw crusher, and note that the size of the ore should not exceed the maximum feed size specified by the equipment.

(3) Start the jaw crusher and wait for the equipment to operate normally before starting the crushing operation.

After the crushing is completed, turn off the jaw crusher and clean and maintain the equipment.

2. Operation of cone crusher

The cone crusher is the second process of the Binhai Zirconium placer gravity separation production line, which is used to further finely crush the ore. The specific operation steps are as follows:

(1) Before starting the cone crusher, it is necessary to check whether the equipment operates normally, and whether the motor, belt, bearings and other parts are in good condition.

(2) Place the ore processed by the jaw crusher into the feed port of the cone crusher, taking care that the size of the ore does not exceed the maximum feed size specified by the equipment.

(3) Start the cone crusher and wait for the equipment to operate normally before starting the crushing operation.

(4) After the crushing is completed, turn off the cone crusher and clean and maintain the equipment.

3. Operation of ball mill

The ball mill is the third process of the Binhai Zirconium placer gravity separation production line, which is used to finely grind the ore. The specific operation steps are as follows:

(1) Before starting the ball mill, it is necessary to check whether the equipment operates normally and whether the motor, belt, bearing and other parts are in good condition.

(2) Place the ore processed by the cone crusher into the feed inlet of the ball mill, taking care that the size of the ore does not exceed the maximum feed size specified by the equipment.

(3) Start the ball mill and wait for the equipment to operate normally before starting the grinding operation.

(4) After the grinding is completed, close the ball mill and clean and maintain the equipment.

4. Operation of Spiral Classifier

The spiral classifier is the fourth process of the Binhai Zirconium placer gravity separation production line, and its function is to classify the grinding ore. The specific operation steps are as follows:

(1) Before starting the spiral classifier, it is necessary to check whether the equipment operates normally and whether the motor, belt, bearing and other parts are in good condition.

(2) Place the grinding ore processed by the ball mill into the feed port of the spiral classifier, and ensure that the particle size of the grinding ore meets the equipment requirements.

(3) Turn on the spiral classifier and wait for the equipment to operate normally before starting the grading operation.

(4) After the grading is completed, turn off the spiral classifier and clean and maintain the equipment.

5. Operation of high-frequency screen

High frequency screening is the final process of the coastal zirconium sand ore gravity separation production line, which is used to screen the grinding ore. The specific operation steps are as follows:

(1) Before starting the high-frequency screen, it is necessary to check whether the equipment operates normally and whether the motor, belt, bearing and other parts are in good condition.

(2) Place the grinding ore processed by the spiral classifier into the feed port of the high-frequency screen, and pay attention to ensuring that the particle size of the grinding ore meets the equipment requirements.

(3) Turn on the high-frequency screen and wait for the equipment to operate normally before starting the screening operation.

(4) After the screening is completed, close the high-frequency screen and clean and maintain the equipment.

3、 Summary

Through the introduction of the above operating steps, it is believed that readers have gained a deeper understanding of the gravity separation production line of Binhai Zirconium Sand Mine. In practical operation, it is necessary to strictly follow the operating steps to ensure the normal operation of the equipment and ensure the efficient and stable operation of the production line.

Binhai Zirconium Sand Gravity Separation Production Line