Zirconium titanium sorting test

Zirconium titanium sorting test

Zirconium titanium separation test is an important mineral separation technology, which is widely used in the extraction and processing of zircon, Ilmenite and other minerals. This article will introduce the operation steps and precautions of zirconium titanium separation test for everyone. 1、 Preparation before the experiment 1. Sample preparation: Crush the mineral samples to an appropriate particle size, usually below 40 mesh. 2. Reagent preparation: select appropriate separation reagents according to actual needs, such as naphthol, hexadecyl trimethyl Ammonium bromide, etc. 3. Instrument and equipment preparation: The zirconium titanium separation test requires the use of magnetic separators, heavy media separators, centrifuges, and other equipment to ensure normal operation. 2、 Experimental operation step 1: Magnetic separation and sorting: Place the sample into a magnetic separator and use magnetic force to separate the magnetic minerals. 2. Heavy medium separation: put the non-magnetic minerals into the heavy medium separator and separate the minerals by using the density difference. 3. Centrifugal separation: Put the sorted minerals into a centrifuge and use centrifugal force to separate light and heavy minerals. 4. Repeat the experiment: The above steps need to be repeated until the desired sorting effect is achieved. III. Test precautions 1 Sample preparation: The particle size of the sample should be appropriate, as either too fine or too coarse can affect the sorting effect. 2. Reagent selection: Choosing appropriate reagents can improve the sorting effect, but the type and dosage of reagents should be controlled within a certain range. 3. Instruments and equipment: Instruments and equipment should be maintained in good working condition and regularly maintained and maintained. 4. Test environment: The laboratory should be kept clean and tidy to avoid impurities interfering with the test results. Summary: Zirconium titanium separation test is an important mineral separation technology, which can effectively separate zircon, Ilmenite and other minerals through magnetic separation, heavy medium separation, centrifugal separation and other steps. Before the experiment, it is necessary to prepare samples, select reagents, and prepare instruments and equipment. At the same time, attention should be paid to the experimental steps and environment to ensure the accuracy and reliability of the test results.

Zirconium titanium sorting test